COB LED Screen packaging technology has great advantages compared with SMD packaging technology.
Its pros: smaller space of LED beads, better protection performance, long service life, and low dead light rate.
Its cons: difficulty in manufacturing finished products, maintenance inconvenience.
The so-called COB package, that is, the chip-on-board package, is actually a kind of LED chip pasted on the PCB substrate, is a new packaging technology different from SMD packaging technology, this packaging technology simplifies the entire packaging process of the chip, but also eliminates the original support and reflow process so that the entire LED is more stable, the point spacing is also smaller, directly improve the resolution of the LED display.
The most important feature of COB packaging technology is that it can reduce the spacing of LED beads. The original package of SMD in the LED display of the small point spacing can only be P1.2, that is, 1.2mm, difficult to achieve, and can not guarantee a certain dead light rate. However, because the encapsulated COB changes the layout and composition of the LED beads, it can essentially reduce the reverse dot pitch, and the resolution is close to the level of the LCD splicing screen.
For LED display with small space, during transportation and installation, as long as it is subjected to external force, some light beads will fall off, resulting in dead lights of individual pixels, not emitting light or only showing monochrome, which has some reason with the encapsulation technology. As the encapsulation COB is the LED chip directly encapsulated in the recess of the PCB lamp, and then fixed with epoxy resin, so the whole lamp ball is a raised sphere, both smooth and hard, with better protection.
COB package product is to encapsulate the lamp on the PCB board, through the PCB board copper foil to quickly transfer the heat of the wick, and the thickness of the PCB board copper foil on the process has strict requirements, coupled with the gold plating process, almost will not cause serious light attenuation. Thus greatly extending the service life of the LED display.
When the LED display is encapsulated in COB, it has to ensure the lamp with no problem before refilling. It cannot replace a single bulb as an SMD package, so it is very demanding throughout the packaging process.
If it’s a traditional LED light package SMD, you can disassemble the unit board after a single bulb soldering repair. When it comes to the COB product, the maintenance will affect the surrounding lamps, maintenance is very difficult, and although its protection performance is better, there still will be a certain dead light rate, in this case, can only replace the unit board.
With the introduction of any packaging technology, there are reasons for its existence and space, of course, there will be imperfections. In the future, the development and promotion of technology will also reduce this impact. In short, COB LED screen technology is a future development trend, especially since its LED packaging space is small, for many users, the resolution is a very important technology.
With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of high density cob led chip.