In the aluminum casting procedure, aluminum is heated to its molten form and then poured into a mold. The mold must be created with precision since its quality directly impacts the form and surface finish of the completed aluminum casting.
The mold can be made from numerous materials, like tool steel, since aluminum has a lower melting point than steel. Another material that can be a mold for aluminum casting is sand. For this, sand is pressed down to take the shape of the required finished part. Once the sand is shaped, the liquid aluminum is poured into it and left to cool.
Aluminum castings have attributes similar to other aluminum components. Once the casting procedure is done, the aluminum castings quickly make an external layer of aluminum oxide, which helps shield against corrosion.
The different methods of aluminum casting methods include:
In aluminum sand casting, mold is made from sand and chemical bonding agents. Patterns are put inside the mold and pressed tightly.
After extracting the pattern, it is formed into a mold cavity which is a replica of the aluminum casting shape.
Liquid aluminum is poured into the mold cavity through a gating system and solidified. As the casting cools off, the caster breaks off the sand mold, and the casting is taken.
There are two types of pressure die casting: high pressure die casting and low pressure die casting.
High pressure aluminum die casting is an aluminum casting procedure that constructs casting pieces by pressing aluminum liquid under high pressure of nearly 1200bar into a steel mold through a cylinder pistol.
Liquid aluminum is pumped at high speeds and solidifies rapidly to make the aluminum casting parts.
With low pressure aluminum die casting, the mold is filled with molten metal from a pressure-adjustable crucible, commonly 0.7bar.
The metal hardening furnace is placed below. The liquid aluminum is pumped directly, starting from the base up, to fill the mold.
Aluminum low pressure die casting is perfect for manufacturing aluminum casting pieces with wall thickness starting from 0.12 in (3mm). The volume may be up to 330 lbs (150kg).
Shell molding is a molding technology with a mold made from thermosetting phenolic resin.
First, the two parts of the patterns are designed and made from metal, then heated and covered with lubrication.
Then the pattern is placed into the thermoset sand compartment prepared above and then turned upside down. The blend of resin sand sticks onto the pattern and hardens, forming a shell.
The pattern is detached, leaving a shell. Two parts of the pattern form two shell molds about 0.39 – 0.78 inches (10-20mm) thick. These two shell molds are attached to form a complete mold. Liquid aluminum is poured into the mold and solidifies into a casting shape.
Shell mold aluminum casting is one of the aluminum casting methods that are perfect for constructing hollow core or die castings.
Also known as metal mold casting, it is one of the aluminum casting methods which uses metal as the mold material, similar to pressure die casting. Accordingly, the molten aluminum is pushed into the mold by its gravity; hence, the pouring speed is fairly low. Due to the metal-made mold, the casting cooling speed is rapid.
Components of small appliances, lawnmowers, hand tools, and other machines are made from numerous different special aluminum castings.
Casting products are very often utilized by cutlery, the first aluminum product which was made to be available for daily usage.
Automotive and Aircraft parts must be light, and aluminum castings are perfect for such applications. Many applications which require light and non-toxic materials use aluminum castings.
Below are the major benefits of aluminum castings:
For the most constructive outcome when selecting an aluminum casting company, it is important to compare several businesses using our directory of aluminum casting companies. Each aluminum casting company has a business profile page illustrating their areas of experience and capabilities, along with a contact form to directly communicate with this business for more information or request a quote. Review each aluminum casting business using our proprietary website previewer for a better understanding of what each business specializes in. Then, use our simple RFQ form to contact multiple aluminum casting companies with the same form.
Want more information on custom aluminum casting Russia? Click the link below to contact us.