Hot Dipped Galvanized Steel Sheet & Coil Supplier

Hot-dip galvanizing is a process of coating steel with a thin zinc layer, which serves as a barrier between the steel and the environment. The finish is applied by passing the steel through a molten bath of zinc at a high temperature. Protect against corrosion with hot-dipped galvanized steel sheet and coil products from Alliance Steel.

Alliance Steel’s hot-dipped galvanized steel sheet and coil service capabilities include slitting, multi-blanking and cut to length, metallurgical support, stretcher leveling, and toll processing. 

Applications for Hot Dipped Galvanized Steel Products

Galvanized steel is well suited for applications that need rust-resistant materials at a competitive price, ultraviolet light protection, and easy integration with other materials. Industries that use hot-dipped galvanized steel products include:

Hot Dipped Galvanized Steel Sheet

Alliance Steel can provides hot-dipped galvanized steel sheet & coil products to meet you ASTM requirements. 

Alliance Steel

Multi-Blanking

Capabilities:

Material Thickness:  .015"-.135 Max Coil:  

45,000 lbs.

ID:   

20”-24”

Entry Width:  

15.00”-74.00”

Exit Width:  

5.00”-74.00”

Length:  

6.00”-144”

Width/Length Tolerance:  

+/-.010"

Max Coil Weight:  

50,000 lbs.

For more information about hot dipped galvanized steel sheet and coil products, contact Alliance Steel.

Hot Dipped Galvanized Steel Coil 

Alliance Steel

Slitting

Capabilities:

Material Thickness:

.010"-.500"

Min/Max Slit Width:

.375”-84”

Min/Max ID:

20”-30”

Max OD:

84"

Slit Width Tolerance:

+/-.005"

 

Structural Grades C Mn P S Al Si Cu Ni Cr Mo V Cb Ti N 30,33,36,40 0.25 0.9 0.035 0.04 0.2 0.2 0.15 0.06 0.008 0.008 0.025 36T2,45-80 0.25 1.35 0.035 0.04 0.2 0.2 0.15 0.06 0.008 0.008 0.025 45T2 .02- 0.08 .30- 1.0 .03- .07 0.025 .02- .08 0.6 0.2 0.2 0.15 0.06 0.008 0.008 0.025 .01- .03

HSLA Grades C Mn P S Al Si Cu Ni Cr Mo V Cb Ti N 45C1 0.22 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 45C2 0.15 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 50C1 0.23 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 50C2 & 55C2 0.15 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 55C1 0.25 1.35 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 60C1 & 65C1 0.26 1.5 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 60C2 & 65C2 0.15 1.5 0.04 0.04 0.2 0.2 0.15 0.06 0.005 0.005 0.005 70C1 0.26 1.65 0.04 0.04 0.2 0.2 0.15 0.16 0.005 0.005 0.005 70C2 0.15 1.65 0.04 0.04 0.2 0.2 0.15 0.16 0.005 0.005 0.005

Common Grades C Mn P S Al Si Cu Ni Cr Mo V Cb Ti N CSA 0.1 0.6 0.03 0.035 0.2 0.2 0.15 0.06 0.008 0.008 0.025 CSB 0.02-.15 0.6 0.03 0.035 0.2 0.2 0.15 0.06 0.008 0.008 0.025 CSC 0.08 0.6 0.1 0.035 0.2 0.2 0.15 0.06 0.008 0.008 0.025 BH 0.012 1.5 0.12 0.03 0.2 0.2 0.15 0.06 0.008 0.008 0.025 FSA 0.1 0.5 0.02 0.035 0.2 0.2 0.15 0.06 0.008 0.008 0.025 FSB 0.02-.15 0.5 0.02 0.03 0.2 0.2 0.15 0.06 0.008 0.008 0.025 DDS 0.06 0.5 0.02 0.025 .01 0.2 0.2 0.15 0.06 0.008 0.008 0.025 EDDS 0.02 0.4 0.02 0.02 .01* 0.2 0.2 0.15 0.06 0.1 0.1 0.15