Amutha Jeevakumari SA, Indhumathi K, Arun Prakash VR (2020) Role of cobalt nanowire and graphene nanoplatelet on microwave shielding behavior of natural rubber composite in high frequency bands. Polym Compos 41:4362–4371
Prakash VA, Viswanthan R (2019) Fabrication and characterization of echinoidea spike particles and kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio composite. Compos A: Appl Sci Manuf 118:317–326
Ravi Raj V, Vijaya Ramnath B (2020) Mechanical, Thermal and Wear Behavior of SiC Particle Strengthening of PMMA-Toughened Glass-Epoxy Hybrid Composite. Silicon. https://doi.org/10.1007/s12633-020-00580-5
Arun Prakash VR, Jayaseelan V, Mothilal T et al (2019) Effect of silicon coupling grafted ferric oxide and E-glass fibre in thermal stability, wear and tensile fatigue behaviour of epoxy hybrid composite. Silicon 12:2533–2544. https://doi.org/10.1007/s12633-019-00347-7
Prakash VRA, Jaisingh SJ (2018) Mechanical strength behaviour of Silane treated E-glass fibre/Al 6061 & SS-304 wire mesh reinforced epoxy resin hybrid composite. Silicon 10:2279–2286. https://doi.org/10.1007/s12633-018-9762-y
Karunagaran N, Rajadurai A (2016) Effect of surface treatment on mechanical properties of glass fiber/stainless steel wire mesh reinforced epoxy hybrid composites. J Mech Sci Technol 30:2475–2482. https://doi.org/10.1007/s12206-016-0507-9
Vincent VA, Kailasanathan C, Shanmuganathan VK, Kumar JVSP, Arun Prakash VR (2020) Strength characterization of caryota urens fibre and aluminium 2024-T3 foil multi-stacking sequenced SiC-toughened epoxy structural composite. Biomass Conv Bioref. https://doi.org/10.1007/s13399-020-00831-w
Uzay Ç, Geren N (2020) Effect of stainless-steel wire mesh embedded into fibre-reinforced polymer facings on flexural characteristics of sandwich structures. J Reinf Plast Compos 39(15-16):0731684420921952
Sivakumar D, Ng LF, Lau SM, Lim KT (2018) Fatigue life behaviour of glass/kenaf woven-ply polymer hybrid biocomposites. J Polym Environ 26(2):499–507
Sathish P, Kesavan R, Ramnath BV, Vishal C (2017) Effect of Fiber orientation and stacking sequence on mechanical and thermal characteristics of Banana-Kenaf hybrid epoxy composite. Silicon 9:577–585. https://doi.org/10.1007/s12633-015-9314-7
Afrey Daniel James D, Manoharan S, Saikrishnan G, Arjun S (2020) Influence of bagasse/sisal fibre stacking sequence on the mechanical characteristics of hybrid-epoxy composites. J Nat Fibers 17(10):1497–1507. https://doi.org/10.1080/15440478.2019.1581119
Behnia B (2020) Ali Aali Anvari, Hossein Safardoust-Hojaghan, and Masoud Salavati-Niasari. "positive effects of novel nano-zirconia on flexural and compressive strength of Portland cement paste.". Polyhedron 177:114317
Mortazavi-Derazkola S, Salavati-Niasari M, Khojasteh H, Amiri O, Ghoreishi SM (2017) Green synthesis of magnetic Fe3O4/SiO2/HAp nanocomposite for atenolol delivery and in vivo toxicity study. J Clean Prod 168:39–50
Zinatloo-Ajabshir S, Mortazavi-Derazkola S, Salavati-Niasari M (2017) Simple sonochemical synthesis of Ho2O3-SiO2 nanocomposites as an effective photocatalyst for degradation and removal of organic contaminant. Ultrason Sonochem 39:452–460
Salavati-Niasari M, Shakouri-Arani M, Davar F (2008) Flexible ligand synthesis, characterization and catalytic oxidation of cyclohexane with host (nanocavity of zeolite-Y)/guest (Mn (II), co (II), Ni (II) and cu (II) complexes of tetrahydro-salophen) nanocomposite materials. Microporous Mesoporous Mater 116(1–3):77–85
Salavati-Niasari M, Davar F, Mazaheri M (2009) Synthesis and characterization of ZnS nanoclusters via hydrothermal processing from [bis (salicylidene) zinc (II)]. J Alloys Compd 470(1–2):502–506
Esmaeili E, Salavati-Niasari M, Mohandes F, Davar F, Seyghalkar H (2011) Modified single-phase hematite nanoparticles via a facile approach for large-scale synthesis. Chem Eng J 170(1):278–285
Salavati-Niasari M, Javidi J, Dadkhah M (2013) Ball milling synthesis of silica nanoparticle from rice husk ash for drug delivery application. Comb Chem High Throughput Screen 16(6):458–462
Salavati-Niasari M, Davar F, Fereshteh Z (2009) Synthesis and characterization of ZnO nanocrystals from thermolysis of new precursor. Chem Eng J 146(3):498–502
Salavati-Niasari M, Banitaba SH (2003) Alumina-supported Mn (II), co (II), Ni (II) and cu (II) bis (2-hydroxyanil) acetylacetone complexes as catalysts for the oxidation of cyclohexene with tert-butylhydroperoxide. J Mol Catal A Chem 201(1–2):43–54
Salavati-Niasari M (2005) Nanoscale microreactor-encapsulation of 18-membered decaaza macrocycle nickel (II) complexes. Inorg Chem Commun 8(2):174–177
Gokul R, Ramesh Kumar R (2019) Mechanical and low velocity impact behaviour of intra-ply glass/Kevlar fibre reinforced Nano-silica and micro-rubber modified epoxy resin hybrid composite. Mater Res Express 6:055302–055308
Varghese AJ, Ronald BA (2020) Low velocity impact, fatigue and Visco-elastic behaviour of carbon/E-glass intra-ply fibre-reinforced Nano-silica toughened epoxy composite. Silicon:1-7
Monfared RM, Ayatollahi MR, Isfahani RB (2018) Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites. Theoretic Appl Fract Mech 96:272–284
Arun Prakash VR, Rajadurai A (2016) Thermo-mechanical characterization of silane treated E-glass fiber/hematite particles reinforced epoxy resin hybrid composite. Appl Surf Sci 384:99–106
Ramesh C, Manickam C, Maridurai T, Arun Prakash VR (2017) Dry sliding wear characteristics of heat treated and surface modified hematite particles-epoxy particulate composite. Romanian J Mater 47(3):401–405
Merizgui T, Hadjadj A, Kious M, Prakash VRA (2020) Effect of temperature and frequency on microwave shielding behaviour of functionalized Kenaf fibre-reinforced MWCNTs/Iron(III) oxide modified epoxy hybrid composite. Trans Electr Electron Mater 21:366–376. https://doi.org/10.1007/s42341-020-00179-y
Arun Prakash VR, Viswanathan R Fabrication and characterization of silanized echinoidea fillers and kenaf fibre-reinforced Azadirachta-indica blended epoxy multi-hybrid biocomposite. Int J Plast Technol 23(2):207–217
Arul Murugan M, Jayaseelan V, Jayabalakrishnan D, Maridurai T, Selva Kumar S, Ramesh G, Arun Prakash VR (2019) Low velocity impact and mechanical behaviour of shot blasted sic wire-mesh and silane-treated aloevera/hemp/flax reinforced SiC whisker modified epoxy resin composites. Silicon 10(3):1–12
Arun Prakash VR, Rajadurai A, Jayaseelan V, Jerome Dass S, Murali M (2019) Role of silanized magnetic Fe2O3 particle in heat dissipation and microwave shielding behavior of E-glass fibre-reinforced epoxy resin composite. Mater Res Express 6:076113
Dani MSH, Venkateshwaran N (2020) Role of surface functionalized crystalline Nano-silica on mechanical, Fatigue and Drop Load Impact Damage Behaviour of Effective Stacking Sequenced E-glass Fibre-reinforced Epoxy Resin Composite. Silicon. https://doi.org/10.1007/s12633-020-00486-2
Gnanavel M, Maridurai T, Kumar KM (2019) Mechanical, thermal and dielectric behavior of C-class fly-ash coarse and fine particles reinforced epoxy resin composite. Mater Res Express 6(2019):095507
Ramesh M, Palanikumar K, Reddy KH (2013) Mechanical property evaluation of sisal–jute–glass fiber reinforced polyester composites. Compos Part B 48:1–9
Hasselbruch H, Von Hehl A, Zoch HW (2015) Properties and failure behavior of hybrid wire mesh/carbon fiber reinforced thermoplastic composites under quasi-static tensile load. Mater Des 66:429–436
Chavhan GR, Wankhade LN (2020) Improvement of the mechanical properties of hybrid composites prepared by fibers, fiber-metals, and nano-filler particles–a review. Mater Today: Proc 27:72–82
Dinesh T, Kadirvel A, Hariharan P (2020) Role of nano-silica in tensile fatigue, fracture toughness and low-velocity impact behaviour of acid-treated pineapple fibre/stainless steel wire mesh-reinforced epoxy hybrid composite. Mater Res Express 6(12):125365
Pandya KS, Akella K, Joshi M, Naik NK (2012) Ballistic impact behavior of carbon nanotube and nanosilica dispersed resin and composites. J Appl Phys 112(11):113522
Jumahat A, Soutis C, Abdullah SA, Kasolang S (2012) Tensile properties of nanosilica/epoxy nanocomposites. Procedia Eng 41:1634–1640
Jayabalakrishnan D, Saravanan K, Ravi S, Prabhu P, Maridurai T, Prakash VA (2020) Fabrication and characterization of acrylonitrile butadiene rubber and stitched E-glass fibre tailored Nano-silica epoxy resin composite. Silicon: 1-9
Han W, Chen S, Campbell J, Zhang X, Tang Y (2016) Fracture toughness and wear properties of nanosilica/epoxy composites under marine environment. Mater Chem Phys 177:147–155
Dharmavarapu P, Reddy MS (2020) Mechanical, low velocity impact, fatigue and tribology behaviour of Silane grafted aramid fibre and Nano-silica toughened epoxy composite. Silicon:1-10
Krishnasamy P (2019) Dynamic mechanical characteristics of jute fiber and 304 wire mesh reinforced epoxy composite. J Indust Textiles:1528083719883057
Wan Y, Diao C, Yang B, Zhang L, Chen S (2018) GF/epoxy laminates embedded with wire nets: a way to improve the low-velocity impact resistance and energy absorption ability. Compos Struct 202:818–835
Khalili S, Khalili SMR, Farsani RE, Mahajan P (2020) Flexural properties of sandwich composite panels with glass laminate aluminum reinforced epoxy facesheets strengthened by SMA wires. Polymer Testing:106641
Krishnasamy P, Rajamurugan G, Thirumurugan M (2020) Performance of fiber metal laminate composites embedded with AL and CU wire mesh. J Indust Textiles:1528083720935570
Vimalanathan P, Venkateshwaran N, Santhanam V (2016) Mechanical, dynamic mechanical, and thermal analysis of Shorearobusta-dispersed polyester composite. Int J Polym Anal Charact 21(4):314–326