6/4 D-AH Slurry Pump Wet End Spare Parts
ShiJiaZhuang NaiPu Pump Co.,Ltd , Is one of professional factory of
slurry pump, sand gravel pump , dredging pump , Water pump and spare parts .
The pump and spare parts can totally interchange with
AH HH M L SP AF G
Series.
NaiPu Pump is devoted to pump solution industry for more than 30 years!
The Pumps
are widely used in in metallurgy, mining, Nonmetallic Mining, Coal, Energy
resources, Sand mining, Dredging, Environmental protection, Petrochemical engineering, Flue gas desulfurization and other industrial departments.
The Pumps have been exported to USA, Canada, Germany, Russia , Australia, South Asia, North America, South Africa, and etc , up to more than sixty countries.
Product Description
Spare parts for 6-4 DAH Spare Parts
IMPELLERS- the options of Wada Horizontal Slurry pump impeller material is mutitudinous,both metal and elastomer is available and interchangeable,they are casting or molded by special wear resistant material to provide a long life span in heavy duty abrasion and corrosion slurry pumping situation. Opened vanes and closed vanes impellers are designed for reducing re-circulation during pumping,also working to adjust the pump heads.
VOLUTE LINERS/COVER PLATE LINERS/FRAME PLATE LINERS - These liners is mainly made by High chorme alloy,rubber and polyurethne. Metal liners is the better choice for ore size big and have sharp corner and high abrasion media transport such as iron slurry and so on,elastomer liners have better adaptability in stansfer ore size fine,no sharp point and high corrosion media,like Gold,cooper ore pulp.
THROAT BUSH - Metal,Rubber,poly Throat bush designed to reduce wear and increase efficiency.
FRAME PLATE LINER INSERT - when the pump size reach to 12/10 or more big, the frame plate liner insert is separated from frame plate liner to provide a easy to load and unload function.
DUCTILE GRAY PARTS
COVER PLATE/FRAME PLATE/CASING- These unwear parts poured by Ductile or Gary Iron to provide a wide working pressure range choice, horizontal split-case design allows for ease to access and maintenance for wear parts - Ductile iron casing can provides more high pumping pressure and more safety.
BASE/BEARING HOUSING -Cylindrical bearings assembly with robust base provide a stronger stability during operation,it also allow to adjust the distance between cover plate liner and impeller easily.With grease lubrication,the Bearing assembly can be removed smoothly when it need to be repaired.
6/4D-AH(R) Rubber Liner Slurry Pump
Spare parts for 6-4 DAH Spare Parts
100ZJ(6/4D-AH)
Oil Cup Base
D138
Frame Base
D003M
Frame PLate
DAM4032
Frame PLate
DAM4032
Cover plate
E4013
Cover plate
E4013
Impeller
E4147R
Impeller
E4147
Throat Bush
E4083R
Throat Bush
E4083
Volute liner
E4110
Cover plate liner
E4018R
frame plate liner
E4036R
Frame Plate liner Insert
E4041
Shaft sleeve
D075
Shaft Spacer
DAM117
Stuffing Box
DAM078
Stuffing Box
DAM078
Expeller
DAM028
Expeller ring
DAM029
lantern Ring
D063
Keeper Plate
E4081
Lantern Restrictor
D118
Neck Ring
D067
Gland Assembly
D044
Lip Seal Gland
D241
Cover Plate Bolt
E4015M
Impeller O-ring
F064
Intake Joint
E4060
Discharge Joint
E4132XLP
Shaft O ring
D109
Expeller Ring /Stuffing Box Seal
Seal Ring
E122
Labyrinth
D062
Lip seals
D090
Bearing Hosing
D004M
End Cover
D024
labyrinth
D062
Shaft
DAM073M
Bearing Assembly
DAM005M
Grease RetainerButter retaining ring
D046
If you have any questions on Wear-Resistant Castings for Slurry Pump. We will give the professional answers to your questions.