Servo Roll Feeds

servo feeds by ROWE©

ROWE©'s PM-LT, PM, HDPM (Press-Mounted and Heavy Duty Press Mounted), and (4) roll cabinet series servo roll feeds are backed by over 50 years of experience in many different applications and environments, such as appliance (refrigerators & ranges), automotive, office furniture, store furnishings, lighting fixtures, air conditioning & heating, steel drums, door hinges, and contract stampers.

Standard Features

Standard Servo Feed Features
• Precision Gear Drive
• Integral Entry Catenary Roll Assembly
• Pneumatic Pilot Release on Upper Feed Roll
• Matte Chrome-Plated, Full Width Feed Rolls
• (2) and (4) Roll Designs
• Quick Release Roller Stock Guides
• Material Capacity to Meet any Application
• Roll Repeatability of +/- .002"

Control Features

Servo Feed Control Features
• B&R Automation Servosystem
• Compact Operator Console
• 200 Job Memory w/ Battery-Backed-up RAM
• Part Lengths Programmable from .0005" to 999.999"
• Keypad Operator Interface
• Emergency Stop
• Automatic & Manual Modes
• Single Stroke, & Feed-and-Fire Modes
• Roll Lift Functionality
• Jog Forward/Reverse
• Jog to Programmed Length
• +/- .001" In-Motion Micro Adjust
• Batch Counter w/ Reset
• Complete Diagnostics and Job Status Screens
• 230 V  or 460 V  / 3 ph. / 60 hz.
• Hand held Pendant Operator Control
• SAE or Metric Dimensioning

Programmable Pattern Control Capabilities Demo

 

Available Servo Feed Options

PM Servo Feed with Pull-Thru Straightener
mounted on a crank adjust feed stand.

Available Servo Feed Options
• Pull-Thru Straightener
• Anti-Backup Roll Assembly
• Crank Adjust Centering Stock Guides w/ 1" Offset
• Independent Crank Adjust Stock Guides
• Crank Adjust Feed Stand, +/- 3" PLH Adjustment
• Motorized Adjustment for Stand
• CenterFeed Stock Lubricator (roller lubricator)
• Automatic Central Lubrication ((4) roll only)
• End-of-Stock Detector
• Gag Tooling Capability
• Programmable Pattern Capability
• Zig-Zag Feed Capability
• Push-Pull Feed Capability
• Allen-Bradley, GE, Indramat, or Siemans Controls available

PM-LT Servo Feed — 2.75" Roll Diameter

Model

Stock Width

Capacity / Full Width

PMLT 12

12

.156

PMLT 18

18

.125

PMLT 24

24

.093

PMLT 30

30

.078

PMLT 36

36

.062

PM Servo Feed — 4" Roll Diameter

Model

Stock Width

Capacity / Full Width

PM—15

15

.250

PM—20

20

.250

PM—30

30

.187

PM—40

40

.140

PM—50

50

.093

PM—60

60

.062

HDPM Servo Feed — 6" Roll Diameter

Model

Stock Width

Capacity / Full Width

HDPM—12

12

.375

HDPM—18

18

.328

HDPM—24

24

.281

HDPM—30

30

.265

HDPM—36

36

.250

HDPM—42

42

.218

HDPM—48

48

.171

HDPM—60

60

.156

4 Roll Servo Feed — 4" or 6" Roll Diameters

Rowe© pioneered the 4 roll servo feed for the Cut-to-Length industry in the late 80's. Soon after introduction to the market, our 4 roll servo feed became the go-to workhorse for Cut-to-Length lines around the world. Today, our heavy duty 4 roll feed is comfortably at home feeding HSLA & AHSS materials for automotive stampers.

 

 

Rowe©'s Gearbox Design

Our gearbox design drives the feed rolls accurately, quietly, and has years of proven reliability. The oil bath eliminates the need for periodic lubrication. Rowe©'s Zero-backlash design provides for greater accuracy, allowing for roll repeatability of +/- .002".

 

 

Crank Adjust Floor Mount Stand, +/- 3"

Gib guided design allows for quick and accurate passline height adjustment with a simple turn of the hand-crank. No further alignment or securing to the press is necessary.