Guide to Bulbs for Recessed & Track Lights

13 Oct.,2023

 

Guide to Bulbs for Recessed & Track Lights

  • POST a QUESTION or COMMENT about how to choose, install, or troubleshoot recessed lights & track lights in buildings

InspectAPedia tolerates no conflicts of interest. We have no relationship with advertisers, products, or services discussed at this website.

Track lighting bulbs: how to select bulbs for track lights: here we provide a detailed guide to different types of light bulbs (lamps) and their application to track lighting.

We also provide an ARTICLE INDEX for this topic, or you can try the page top or bottom SEARCH BOX as a quick way to find information you need.

Guide to Lamps (Bulbs) Used with Recessed & Track Lights

This article series details guidelines for selecting and installing interior lighting to meet the requirements for different building areas. This article includes excerpts or adaptations from Best Practices Guide to Residential Construction (Steve Bliss, J Wiley & Sons) , by Steven Bliss, courtesy of Wiley & Sons.

[Click to enlarge any image]

Beam spreads for directional lights vary depending on the lamp and fixture. For general lighting, choose a wide flood with a beam spread of at least 50 degrees.

BR lamps are the most economical directional lamp and provide good enough beam control for general lighting.

Standard A lamps with Alzak trim or compact fluorescents also provide good general lighting.

Halogen PAR lamps offer more precise beam control suitable for task or accent lighting.

Low-voltage M-16 and PAR36 lamps offer very precise beam control, making them well-suited to accent lighting.

Because of their narrow focus, spots produce higher illumination levels than floods but over a smaller area.

Beam spreads and lighting levels for common directional lamps are shown in Table 5-24.

Aiming Lamps Mounted on Track Lighting

For accent lighting, eyeballs and similar adjustable trims allow the homeowner to direct the light to the artwork or architectural feature being lit (Figure 5-30).

These are typically used with a narrow spot to provide bright focused light on a small area. Slotted wall wash trim is used to splash diffused light on broad areas of wall or bookcases

. Nondirectional A lamps or compact fluorescents work well in this application.

General recommendations for recessed lighting bulb wattage or bulb type and fixture spacing are given in Table 5-25.

Spacing Guidelines for Track Lighting Lamps

The general rule for ambient or task lighting may apply to track lighting spacing & aiming: that is to space recessed ceiling fixtures approximately the same distance apart as the beam spread at the work height, typically assumed to be 30 inches above the floor (36 inches for kitchen counters).

The beam spread is the central cone of light, where the beam is at least 50% of the brightness at the center of the beam.

Most manufacturers publish beam spread data for their recessed lights with different trim options. Beam spreads and lighting levels for some common fixtures and lamps are shown in Table 5-26.

Table 5-26.

For accent lighting, space recessed or track fixtures so their light hits the wall at about 30 degrees. For lighting a large wall area, the distance between fixtures should be equal to or less than their distance from the wall (see Figure 5-23).

Figure 5-23

American Lighting Association www.americanlightingassoc.com

- - Adapted with permission from Best Practices Guide to Residential Construction (Steve Bliss, J Wiley & Sons) .

Reader Comments & Q&A

Question:

(Nov 4, 2014) Mahaveer said:
Solution for a classroom
Size 600 Sq.ft Ceiling height 9ft (Inssulated false ceiling)
Fixture: 5" dia with aluminum mirror type reflector
Bulb: Philips LED bulb of 7W or 9W
Illumination at ground level required is 250 lux
Could you please guide me for-

1.Number of fixtures needed

2.distance between fixtures

Reply:

Mahveer, see SPACING GUIDE for LIGHT FIXTURES

and also see LIGHTING LEVELS INDOORS, RECOMMENDED

and choose your bulbs from LAMP & BULB TYPES, INDOOR


...

Continue reading at RECESSED LIGHT FIXTURE TRIM or select a topic from the closely-related articles below, or see the complete ARTICLE INDEX.

Or see these

Interior Lighting Articles

Suggested citation for this web page

RECESSED & TRACK LIGHT BULB GUIDE at InspectApedia.com - online encyclopedia of building & environmental inspection, testing, diagnosis, repair, & problem prevention advice.

Or see this

INDEX to RELATED ARTICLES: ARTICLE INDEX to BUILDING LIGHTING

Or use the SEARCH BOX found below to Ask a Question or Search InspectApedia

...

Ask a Question or Search InspectApedia

Try the search box just below, or if you prefer, post a question or comment in the Comments box below and we will respond promptly.

Search the InspectApedia website

Note: appearance of your Comment below may be delayed: if your comment contains an image, photograph, web link, or text that looks to the software as if it might be a web link, your posting will appear after it has been approved by a moderator. Apologies for the delay.

Only one image can be added per comment but you can post as many comments, and therefore images, as you like.
You will not receive a notification
when a response to your question has been posted.
Please bookmark this page to make it easy for you to check back for our response.
Our Comment Box is provided by Countable Web Productions countable.ca

Citations & References

In addition to any citations in the article above, a full list is available on request.

Want more information on LED Track Light Supplier? Click the link below to contact us.