As a renewable energy source, solar energy plays an important role in reducing greenhouse gas emissions and mitigating climate change, which is critical to protecting people, wildlife and ecosystems. Solar energy can also improve air quality and reduce water use in energy production. When solar energy is applied to LED street lights, the combination of the two makes solar powered street lights perform well in environmental protection and energy saving. This article mainly introduces some knowledge of solar energy and solar street lights, including some concepts and their advantages and disadvantages.
Solar power is the process of converting renewable energy from sunlight to electricity, either directly using solar panels (photovoltaic cells) or indirectly using concentrated solar energy. More commonly, the solar panel uses the photovoltaic effect to convert light into electric current, which can be used directly or stored in a battery for later use.
Solar powerFor your quick understanding, we make it in the below tables. Generally speaking, the advantages outweigh the disadvantages, and I believe that many of the disadvantages will be solved gradually after the progress of technology.
There are several disadvantages of solar panels, including:
1. High upfront costs: The initial cost of installing a solar panel system can be quite expensive. It may take several years to recoup the investment of the initial setup, making it a long-term commitment.
2. Weather dependency: Solar panels rely on sunlight to generate energy. This can be a major disadvantage in areas with frequent cloud cover, rain, or low sunlight throughout the year.
3. Limited energy storage: Solar panel systems require energy storage systems or backup batteries to store excess energy for use during periods of low sunlight or high demand. This can add to the cost of the system and limit the amount of energy that can be generated.
4. Space requirements: Solar panels require a large amount of space to install. Large solar panels may not be feasible for households with limited roof or yard space.
5. Maintenance and repair: Solar panels may require regular maintenance and repair to ensure optimal operation. This can be time-consuming and costly.
6. Environmental impact: While solar panels are a cleaner source of energy compared to non-renewable resources, the production and disposal of solar panels can also have environmental impacts.
AdvantagesDisadvantagesSolar energy can be used to heat water, power homes and buildings, and even power carsThe high initial cost of materials and installation, long ROI (however, solar is becoming more feasible as energy costs rise)Solar energy is pollution-free and emits no greenhouse gases when usedInstallation generally requires a lot of space, and the efficiency is not very highThe utilization of solar energy can reduce reliance on foreign oil, gas, and fossil fuelsNo solar power at night, so a large battery pack is needed to store electricians to use at nightClean energy can be regenerated as long as there is sun throughout the year, and some electricity can be generated even on cloudy daysEquipment that uses solar energy directly is generally more expensive, because solar energy has not been fully popularized, and the corresponding equipment running on DC power is more expensiveHigh investment in the early stage, high return in the later stageDepending on geographic location, solar panel sizes for the same power generation will varySolar panels last over 30 years with little maintenanceCloudy days don’t generate as much energy, rainy days don’t generate as much energyHelping the economy by creating jobs for manufacturers and installers alike through the use of solar panelsSolar panels are not widely used, and there are relatively few supporting productsIf it is internally connected to the grid, the excess power can be sold to the power companyThe power of a solar car differs from that of a typical gasoline and diesel carCan be installed anywhere; such as in fields and buildingsAffected by the season, solar energy production decreases in winterUse batteries to store extra power for nighttime use and live off the gridThe attenuation is relatively severe which is a common problem of the batterySolar power is safer than conventional utility powerThe conversion efficiency of solar energy has been increasingThe shape design is improved to make solar energy more versatile, such as solar light poles, solar tiles, etc.Government policy support, such as electric cars, can be used to help reduce initial costsDoes not require wiring like mains, as solar can be installed close to or at the installation site advantage and disadvantages of solar energy Advantages of Solar Energy Disadvantages of Solar Energy Renewable Energy Source Cost Reduces Electricity Bills Weather Dependent Diverse Applications Solar Energy Storage is Expensive Low Maintenance Costs Uses a Lot of Space Technology Development Associated with PollutionBecause there are many advantages of solar power, we, as a manufacturer of LED lights, hope that solar energy can be applied to the use of LED lights. Solar powered street light is one of the more successful cases, mainly due to the progress of LED technology in this century.
Solar LED street lights use LEDs as their light source, and solar panels charge rechargeable batteries during the day and power the LED lights at night. The solar panel mounted on the lighting structure is an integrated solar LED street light (It is also called an all-in-one solar street light), while the solar panel mounted on the light pole is split solar LED street light.
All in one solar street light in UAEWe think there are two reasons, the benefits of solar power and the efficiency of LED Lighting.
The conversion efficiency of solar panels increased these years. Although it’s about 20%. However, for free and clean energy, it doesn’t have much influence on its application in LED light.
We can not do much to reduce energy consumption from traditional light sources. There are two main benefits of LED lighting when it comes to improving efficiency and reducing costs. Firstly, LEDs use far less energy than any previous form of lighting, helping to significantly reduce energy consumption. Secondly, the efficiency of LED lighting requires that the frequency of replacement is greatly reduced, saving maintenance costs.
High-efficiency LED lighting technology makes the benefits of solar energy applications recognized. LED lighting requires less energy than any lighting source used before, so it doesn’t require a lot of solar energy. From the parking lot, pedestrian, and road, these places generally only need to provide lighting at night, so that the solar LED street lights can obtain solar energy during the day, and then convert it into electricity to supply power for the light source at night. The two perfectly combine the sustainable benefits of solar energy and the energy efficiency of LED lighting.
Solar street lights feature little glare, are waterproof, resistant to water, and have a low insect attrition rate. These lights have solar panels that convert solar energy into electrical energy, which is used for dusk-to-dawn illumination operations and stored in the built-in battery. The installation of solar LED street lights is simple and convenient because no extra wiring is needed. It only requires a concrete base and a battery box (A split solar street light can be selected according to need, and an all-in-one solar street light is built in.). Installation does not require extensive labor, materials, and other costs.
Solar street lights convert sunlight into electricity without power consumption. No pollution and no radiation are in line with the current environmental protection concept. With LED sources, it can be said to be the icing on the cake.
Traditional LED street lights may have potential safety hazards due to construction quality, material aging, power supply confusion, and other reasons. While solar LED street lights do not use alternating current, there is no potential safety hazard, which brings convenience to electricians to maintain lamps.
Most solar panels on the market are stable for at least ten years due to mature manufacturing technology. They can generate electricity for thirty years or more.
The solar street light is regulated by a solar charge controller, which can adjust the light intensity according to the natural brightness and people’s needs. In remote areas, the daily maintenance costs of traditional street lights are very high. The solar street lights only need regular inspections, and the maintenance cost is relatively low.
Solar LED street lights do not need to pay electricity bills, and in this era of high energy prices, the payback time is greatly shortened.
Due to the shortage of traditional energy, the application of solar energy will be more extensive. Solar street lights have been applied on many occasions. However, there are also some restrictive factors in the application and promotion of solar street lights.
One of the factors is the initial cost. The initial investment in solar street lights is large. According to the survey, the total cost of installing a solar street light is often three or four times or even more than that of a traditional LED street light.
Batteries have always been a bottleneck for solar applications. Generally speaking, ordinary batteries cannot be fully charged for a long time, and their charging efficiency may drop to 50%, which will definitely affect the lighting conditions at night on continuous rainy days. Therefore, choosing a high-quality battery is crucial when installing solar street lights.
Because they are not grid powered and it has a higher monetary value than regular street lights, the risk of theft is relatively high. This is why the battery often needs to be buried or placed high on the pole.
The conversion efficiency of solar panels is almost 15%~17%. In theory, the conversion efficiency of silicon solar panels can reach about 30%. So we think there is still space for improvement.
Snow or dust, and moisture can accumulate on horizontal PV panels. This has an impact on the conversion of solar energy. The solar panel needs to be cleaned regularly in some places like Saudi Arabia.
Since solar energy comes from the sun, geography and weather conditions directly affect the lighting conditions of solar street lights. Continuous cloudy and rainy days will affect the lighting, so the illumination or brightness of the lights does not meet the national standards. To make matters worse, solar street lights cannot be lit sometimes, especially in winter.
Currently, many suppliers are configuring lead-acid batteries for buyers to reduce costs. They are mainly composed of lead, sulfuric acid, and some other metals and plastics. Waste battery acid contains a large amount of lead, and the random discharge will not only seriously pollute the soil and water flow. In addition, the recycling and processing of waste batteries in China are still in a relatively disordered state, so many waste lead-acid batteries are polluting our living space, even if gel batteries are used, pollution still exists.
Our solar powered street lights do not rely on the utility grid, allowing them to be installed on rural roads and streets without running power to the poles. Currently, within the civilian sector, there is an abundance of so-called 1000W/2000W street lighting systems; however, the reality is that these products often feature power outputs of merely 10W or 20W, coupled with subpar materials and the usage of recycled batteries. This inevitably leads to short lifespans and, in some cases, even instances of spontaneous combustion, posing significant hazards and causing substantial inconvenience to users.
All parameter can be customized, supporting customer to adjust setting based on their specific requirements. For more details you would like to know, please email to me [email protected].
So switching to solar LED street lighting is undoubtedly an investment, but moving towards a sustainable and efficient energy future does not come without a price tag. When it comes to curbing our consumption in an efficient and sustainable way, solar and LEDs are definitely an option worth considering.
For Street Lighting Design Guide, you can read our related article “Key Factors to Consider in the Street Lighting Design“.
The sunshine hours per day or the exact city the street lights will be installed. How many continuous rainy days in the rainy season there? (It matters because we have to make sure the light can still work on 3 or 4 rainy days with little sunshine).The brightness of the LED lamp (50Watt, for example). Working time of solar light every day(10 hours, for example). The height of the poles, or the width of the road. It is best to offer pictures of the locations where the solar lamps going to be installed.
These street lights really rely on photovoltaic cells, which collect solar energy throughout the day. Eventually, these cells transform this solar energy into electrical energy that may be used to light the lamps at night.
Our lighting system requires no maintenance. Typically, rain keeps the panels quite clean. In regions with significant snowfall, it may be necessary to brush off the solar panels. However, due to the angle of the solar panel, snow often falls off as the sun rises and the temperature rises.
1. The initial cost of lamps and installation cost of solar street lights is relatively high (the installation procedure of solar street lights is also stricter than that of standard AC street lights). Although its power consumption is 0, its payback period is long.
2. Solar street lights need to fully convert solar energy into electrical energy on a sunny day, so the efficiency of converting it into electrical energy in rainy or cloudy environments is very low, which greatly limits its application.
ZGSM believes that these two points are the main reasons for limiting the application of solar street lights in road lighting. Of course, with the advancement of technology and cost control, the application of solar energy in road lighting will become more and more feasible in the future.
The on/off switch on solar lights is designed to help conserve and maximize the life of the solar battery. The solar battery is what powers the light, and it is charged during the day when the sun is out. By turning the solar street light off when it is not needed, the battery is saved from unnecessary drain and can last longer.
This is especially important during periods of low sunlight, such as during winter or on overcast days. By conserving the battery, the solar light can continue to function and provide lighting when it is needed.
Additionally, the on/off switch allows users to control the amount of light and when it is used, such as for accent street lighting or security purposes.
Through the above, a solar powered street lights adopted a good quality material with good performance, the service life can reach 3-5 years, and the key component that affects the service life of the solar street light is a battery.
If your solar panels have reached the end of their operational lifespan, you can also explore the option of purchasing replacement solar panels from ZGSM.
My name is Taylor Gong, I’m the product manager of ZGSM Tech. I have been in the LED lights industry for more than 13 years. Good at lighting design, street light system configuration, and bidding technology support. Feel free to contact us. I’m happy to provide you with the best service and products.
Email: [email protected] | WhatsApp: +8615068758483
For more information Philips solar street light, philips industrial lighting, Industrial Lighting Solution, please get in touch with us!