Gate Valve is another important type of valve. We will study Definitions, Parts or construction, Types in the beginning, and these Working principles, Advantages, Disadvantages, Applications, and material at the last in detail.
At the end of the article you can download the PDF version of this articles.
It’s an important type of valve which is used in any process plant. Somebody shouldn’t use them for the directive of water because clear dominance is not attainable. The high speed of the flow in the partly open valve may cause leaching away of the disc and seating veneer and make quavering and uproar.
Now moving to definition,
Definition of Gate Valve:We call the gate valve the sluice valve. It is called a gate valve because the shape of the disc is in the shape of a Gate or wedge-shaped. Gate Wall always opens in the perpendicular direction of the flow of fluid. It is only used to stop or restart the flow of fluid.
This cannot be used as a regulator, because in the starting when it is allowed to open it creates a lot of noise and vibration which creates damage in the disc so that it starts leaking. That’s why did it is fully opened or closed.
The gate valve has two stems rising and non-rising stem.
Stem: A rod that is connected by a disc from one end and the other side connected to the hand wheel.
In the rising stem, when you start rotating handwheels, as the valve opens you can see the rod coming out, and it closes the road goes down. This means you can see the portion of the walls.
But in a non-rising stem, you are unable to see the stem physically. You can see the portion of a wall with the help of an indicator. It is also called Indister screw wall. Mostly used underground when there is a shortage of space.
Gate valve Parts or Construction:The following construction or Parts of Gate Valve:
The valve body is the main pressure-retaining part, that also holds other parts named as disc and stem.
This also provides passage to flow from the valve, its end connection is piping this end can be but welding type, threaded, and many more depends upon the size and pressure of the piping system.
The valve body can be cast, forge in different materials such as cast steel, stainless steel, and alloy steel depend upon the requirement.
It is the second pressure-retaining part of the valve. It is also called a cover. We can connect it with the system by bolting, welding, or threading to create a valve enclosure.
In case of the gate, stop, diaphragm wall it has the opening so that the valve stream and pass through it. Bonded provides access to valve internals during maintenance.
This is is the part that allows throttles or stops flow on its position. In the case of a plug or ball valve, the disk is called a plug or ball.
A disc is seated against the stationary wall seat or seats when the wall is in the closed position.
It can be moved away from the valve seat by the motion of the valve string which the exception of the check valve and safety relief valve in which the disc is moved away from its seat by the fluid flow and pressure.
This is one of the main components of the system which directly affects the leakage rate of the valve. One of the integral to valve body is made up of forged metallic rings or non-metallic rings.
All valves may have one or more seats. In the case of the globe and swing check valve, there is one seat. The gate valve has two seats, one on the upstream side and the other on the downstream side.
Multipod club and ball valves may have several seats. Depending upon the number of ports on the valve or plug.
Stem is a forged solid rod or shaft. The valve steam transferred the required motion of the disc plug or valve for opening and closing of the valve.
The stem is connected to the valve handwheel at one end and the valve disc on the other side.
In gate for globe valve linear motion of the disk open or close the valve. While in plug, ball, butterfly valve disc is not located to open or close the valve. Note that stop check valves or check valve does not have a stem.
The actuator is a mechanism that operates the valve. It is connected to the stem and disc assemble. It may be manually operated by handwheel, manual lever, gear, chain or it can be operated through motor and solenoid.
Many other common parts of the gate valve are gland flange, stem nut, handwheel, slud nuts, bonnet gasket, and many more.
Now moving to different types of gate valve,
Types of Gate valve:There are three ways to classify the Great valve:
There are three types of disc gate valve:
This is one of the oldest and most common valves. It can be installed in any position and also suitable for any fluid. It can also be used in a turbulent flow.
The drawback is sometimes it starts choking because of a thermal expansion inside the pipe, because of that it is more susceptible to leakage. The thermal locking wedge got stuck between the seats due to the expansion of the metal.
This type of disc is made in such a way it becomes flexible, by making cuts in the Periphery of the disc, it can resist thermal pressure. All the cuts are of different sizes, shapes, and depths.
This also provides some strength to it. This system also improves Seat alignment, so that it become leak tighten.
The bigger disadvantage of flexible Gates is line flood tents got collected in the disc. That leads to corrosion and also weekend the disc which is not good for the long term.
It consists of two discs, that are connected with each other parallelly to this is connected with each other through the mechanical mechanism.
The disk can be in which shift as well as parallel disc type. In this thermal Blending cannot be created even after fluid gets heated.
There is a total of five types of body Bonnet joint:
Now we will study working,
How does Gate Valve Works?
Gate valves are used in fluid pipelines to control the flow of fluid. The gate or wedge is there that controls the flow of fluid. A wedge of the gate or shape of the gate is of different shapes they may be circular or rectangular plate-shaped.
It is also termed as a disc of the gate valve. The valve is used to open or close the gate valve. When the wheel with handle is rotated then Gate or wedge moves upward or downward across the flow of any fluid.
The mechanism on which the Gate valve works: When you rotate the handle wheel clockwise then steam and get moves in the downward direction across the fluid flow, and the gate is tightly located between two seats.
So that there is no leakage of any fluid when the valve is closed completely.
When you rotate the handle Wheel in an anticlockwise direction, steam and fluid move upward at the same time across the fluid flow. The valve is opened Chrome closed position that permits the flow of fluid through the Gate valve.
Once Gate is completely opened, which permits very low resistance or no resistance to the flow of any field.
Semi opening condition is not good because it causes erosion of the gate when fluid strikes. It also creates a lot of noise and vibration at the same time.
Gate Valve Working Video: Credit to HardHat Engineer Material used for Gate Valve:Some of Common Material used:
Gray Cast Iron is used mainly for valves in relatively low pressure and temperature service. It is used in applications from kitchen utensils to art pieces.
This metal is increasingly in demand, as it conveniently combines the excellent machinability characteristic of cast iron that is comparable to copper. Because of this toughness, it is also called ductile cast iron.
Carbon steel is tough and has excellent hardness, tensile strength, and impact value. It is commonly used in industrial plants for high temperature and pressure applications
Although comparatively expensive stainless steel has superior corrosion resistance, heat resistance, low-temperature resistance, and excellent mechanical properties.
Bronze is an alloy of copper to which tin, zinc, and lead are added to perceive particular physical properties. Brass is an alloy of copper and zinc. Both alloys have excellent machinability and corrosion resistance and are used for relatively small valves in low-pressure service.
Now we will discuss merits and demerits,
Advantages of Gate valve:The following advantages or merits of Gate Valve is:
The following disadvantages or demerits of Gate Valve is:
The following application or Uses of Gate Valve is:
So this is a small overview of Gate Valve. Let e know have you understood or not? and if you like the article do not forget to share it with your friends and family. Thank you we will meet in another article.