Best Method Of Charging Gel Cell Batteries

By : Jack Wylde    19 or more times read

How to Charge Gel Cell Batteries? If incorrect battery charger or incorrect method of charging is used on these batteries poor performance and premature failure is certain. So, the correct battery charger should be selected and the proper method of charging should be followed for effective charging and reuse of these batteries. This article includes a brief description about gel cell batteries and the proper methods in which they can be charged to reuse these batteries.

A battery, in concept, can be any device that stores energy for later use. There are many types of batteries available. One among them is gel cell battery. Suspended electrolyte and the battery plates made of lead material are the main body parts of this battery. This battery is often referred to as sealed lead-acid (SLA) battery due to its non-leaking containers, but it is not completely sealed; the valve regulation system allows the gas to be expelled from the container. These batteries are often preferred since the chances of the electrolyte leaking is less and also they produce high power.

The first step is to place the battery in charger. Depending on the type of charger there are two types of charging. These are discussed in this article.

These batteries find their application in motorcycles, cars, radio and telecommunications. There are various ways of charging these batteries. One among them is constant voltage charging and this method is considered to be the best method of charging. This method can be done in two ways. One is the fast charging or cyclic charging and the other one is float charging or standby service.

The steps involved in fast charging or cyclic charging method are as follows; the instruction manual is read carefully before starting the work. The used battery which is to be recharged is inserted into the suitable gel cell battery charger. The charger is switched on and the battery is charged till the indicator in the voltmeter indicates 2.45v per cell provided the temperature is twenty degrees in Celsius scale or fifty eight degrees in Fahrenheit scale.

The battery is kept in the same position and in this same voltage till the charging current gets lower to (1x10-2) x C, where C is considered to be the amp hour rating of the battery. The charger is either set to fast charging mode and it is stopped or set to standby service mode.

In standby service method the battery is inserted into the appropriate charger following the instructions in the instruction manual and then charged in exactly same way as in fast charging method with same voltage and temperature reading. At this voltage the own current level should be regulated by the battery itself. When the charging is complete the battery charger is stopped and the battery is removed from the charger. Now, the battery is ready for further use.

Thus we have found an answer for how to charge Gel Cell Batteries charged reuse it again and again for further use. Some precautions must be taken and is always advisable to not use the car battery for charging since the voltage is always fluctuating in it. Find the best car stereo deals at powernetshop.at the have the best product evaluation online.
Find the best car stereo deals at powernetshop.at the have the best product evaluation online.

 Tags:
This article has been viewed 25 time(s).
Submitted on: 2010-02-06